Appendix B — Options reference & factory defaults
Every item in Options, grouped as on screen. “Default” is the factory value of a fresh install (from the bundled default preset); “—” means the row is an action or the value lives on the camera body.
Time codes
Drop Frame switches itself Off when Rec Time Codes is Off, and is locked by the camera while an ATOMOS AirGlu BT sync is active.
| Item | Type | Default |
|---|---|---|
| Rec Time Codes · Off | Choice | tc_mode |
| Rec Time Codes · On | Choice | tc_mode |
| Rec Time Codes · On (HDMI external) Also send TC over HDMI | Choice | tc_mode |
| Count-up · Rec Run Advances only during REC | Choice | tc_countup |
| Count-up · Free Run Advances continuously | Choice | tc_countup |
| Drop Frame Off | Row | — |
| Reset timecode to 00:00:00:00 | Row | — |
Video self-timer
Delays the start of movie recording after tapping REC. The camera offers Off, 2 s or 10 s.
| Item | Type | Default |
|---|---|---|
| Off · fire REC immediately | Choice | video_self_timer |
| 2 seconds | Choice | video_self_timer |
| 10 seconds | Choice | video_self_timer |
HUD tool buttons — visibility & order
Custom control (list, colour picker or reorderable group).
Top banner — visibility & order (video) / Top banner — visibility & order
Custom control (list, colour picker or reorderable group).
Top banner — visibility & order (photo)
Custom control (list, colour picker or reorderable group).
Photo self-timer
Counts down on the HUD after pressing TAKE PICTURE, then fires the capture. Tap the shutter again during the countdown to cancel. Also adjustable from the right-rail ST button.
| Item | Type | Default |
|---|---|---|
| Off · capture immediately | Choice | ✓ default photo_self_timer |
| 2 seconds | Choice | photo_self_timer |
| 5 seconds | Choice | photo_self_timer |
| 10 seconds | Choice | photo_self_timer |
HUD tool buttons — visibility & order (photo)
Custom control (list, colour picker or reorderable group).
Language
System default follows the phone's language (English when the phone's language is not available). Camera and cinema terms — Z Field, LUT, Waveform, R3D, IRE … — and the HUD chip labels stay in English on every language, like on the camera body.
| Item | Type | Default |
|---|---|---|
| App language | Row | — |
Layout
Controls how the LV frame and disabled tools are drawn on the monitor screen.
| Item | Type | Default |
|---|---|---|
| Hide locked (greyed-out) tool buttons | Switch | Off hide_locked_tools |
| Vertical tab strip (left tier) | Switch | Off hud_tabs_vertical |
| LV feed edge-to-edge between tiers | Switch | Off lv_edge_to_edge |
After connecting
| Item | Type | Default |
|---|---|---|
| ‹o.label› | Chip | — |
Overlays & indicators
| Item | Type | Default |
|---|---|---|
| Frame only while recording | Switch | — af_overlay_hide_while_rec |
| L/R eye badge on the AF frame | Switch | — af_eye_badge |
| Recording border | Switch | On recording_border |
| Show camera battery | Switch | On battery_display |
| Type of connection | Switch | On strength_display |
| Show relay link meter | Switch | — viewer_link_display |
| Show live LV FPS readout | Switch | On show_lv_fps |
Popup windows
| Item | Type | Default |
|---|---|---|
| Window opacity {(state.window_opacity * 100).toFixed(0)}% | Row | — |
Fullscreen
| Item | Type | Default |
|---|---|---|
| Button opacity {(state.fs_button_opacity * 100).toFixed(0)}% | Row | — |
| Show scopes in fullscreen | Switch | On scopes_show_in_fs |
| Show radar lights in fullscreen | Switch | On traffic_show_in_fs |
Legend (Z Field / False Color)
| Item | Type | Default |
|---|---|---|
| {tr("Opacity")} {(state.legend_opacity * 100).toFixed(0)}% | Row | — |
| Show legend in fullscreen | Switch | On legend_show_in_fs |
LUT library
| Item | Type | Default |
|---|---|---|
| Restore bundled LUTs | Row | — |
Colors, opacity & accents
Applied to icon + label text (never a solid background fill).
| Item | Type | Default |
|---|---|---|
| Accent colour | Colour | #FF9F0A hud_active_color |
| Accent border on HUD buttons (bottom + right rail) | Switch | Off tool_button_border |
| Clear the Dynamic Island / notch (landscape) | Switch | On avoid_notch |
| Favourite star colour | Colour | #FF9F0A favourite_color |
| Level in-tolerance colour | Colour | #32D74B virtual_horizon_active_color |
| {tr("Top banner")} {(state.top_banner_opacity * 100).toFixed(0)}% | Row | — |
| {tr("Bottom HUD")} {(state.bottom_banner_opacity * 100).toFixed(0)}% | Row | — |
| Bottom tier buttons background | Switch | Off bottom_button_bg |
| Bottom tier buttons solid black | Switch | Off bottom_button_bg |
| Top tier buttons background | Switch | Off top_chip_bg |
| Top tier buttons solid black | Switch | Off top_chip_bg |
| Right rail buttons solid black | Switch | Off rail_solid_black |
Movie recording destination
Which card the camera writes video files to. If the chosen card is missing or full, the camera falls back to the other one automatically.
Custom control (list, colour picker or reorderable group).
Photo recording destination
Which card the camera saves photos to (the camera's Primary slot setting). Live from the camera. / Locked by the camera right now (for example while HDR is on) — change it on the body.
| Item | Type | Default |
|---|---|---|
| / {base} — {tr("not inserted")} Locked by camera / | Choice |
Card status
Live from the camera; refreshes every 10 s, so inserting or ejecting a card updates the row by itself. ● REC = the camera is recording to this card right now. ◉ TARGET = the next recording will go to this card.
Custom control (list, colour picker or reorderable group).
Playback cache
One cache for every camera you have connected. Opened clips and photos are kept on the phone so re-opening is instant. The limit is enforced after every download across all bodies (oldest clips are removed first); CLEAR frees everything now. FORGET removes one body's gallery — index, thumbnails and cached files — from the phone; it comes back the next time that body connects.
| Item | Type | Default |
|---|---|---|
| Clip cache limit ‹state.playback_cache_gb› GB | Row | — |
| In use | Row | — |
Live View resolution
Camera-side image size for the feed (Nikon LiveViewImageSize) — the three sizes the camera offers. Frame rate is limited by the link's round-trip time (one request per frame), not by the camera: smaller sizes answer faster. Compression changes bytes per frame, not fps. Remembered PER CAMERA (edits the live body; a first-time body starts at VGA). Multi View background windows are capped at 30 fps at any size.
| Item | Type | Default |
|---|---|---|
| {tr(o.label)} · {tr(o.detail)} ‹o.fps› | Choice |
Live View quality
Camera-side JPEG compression of the feed (Nikon LiveViewImageCompression). Basic/Normal/Fine set the compression strength; Size priority keeps frames small and fast, Quality priority keeps more detail at the cost of bigger frames. Camera default is Basic – Size priority; the app ships with Normal – Size priority. Size and compression are remembered PER CAMERA — the setting always edits the live body; make a background window live first to change its camera.
| Item | Type | Default |
|---|---|---|
| ‹o.label› | Choice |
Feed smoothing
抖动缓冲、显示同步的帧呈现（增加约 1 帧延迟）。默认关闭——如果网络实时画面不稳定，请启用。.
| Item | Type | Default |
|---|---|---|
| 饲料呈现流畅 | Switch | — lv_smooth |
自适应质量
当 Wi-Fi 连接无法提供您选择的实时取景画质（例如快速平移、细节丰富的场景或连接速度较慢）时，应用程序会暂时降低摄像头的预览画质——首先降低压缩率（精细 → 普通 → 基本），然后降低分辨率（XGA → VGA → QVGA）——以保持帧速率，并在连接恢复后恢复您的设置。此功能默认关闭（重置后也关闭）；适用于实时摄像头。.
| Item | Type | Default |
|---|---|---|
| 自适应实时画面质量 | Switch | Off adaptive_lv |
传感器驱动轮询
摄像头会以传感器帧速率刷新预览；请求更快的帧速率只会重新下载同一张图片。启用此功能后，应用程序会将请求锁定在摄像头的帧速率或其精确分数（50 帧/秒 → 25 或 16.7 帧/秒，60 帧/秒 → 30 或 20 帧/秒，24 帧/秒 → 24 帧/秒），该分数根据链路速度自动选择，因此显示的每个帧都会推进相同数量的传感器帧——节奏稳定而非断续，避免因重复传输而浪费时间。如果链路速度甚至无法达到传感器帧速率的三分之一（低于 16 帧/秒），则画面将保持不同步。此功能默认关闭。.
| Item | Type | Default |
|---|---|---|
| 与摄像机的帧速率匹配 | Switch | — sensor_paced_lv |
预览锐化
在手机显示前应用客户端锐化滤镜。可改善相机压缩后的 Wi-Fi 预览画面略显柔和的视觉效果。不会影响相机本身或任何录制的视频。原始相机图像设置为 0%。.
| Item | Type | Default |
|---|---|---|
| 锐度 {sharpPct}% | Row | — |
相机名称
此摄像头名称已存储到摄像头主机（‹activeInfo?.name ?? tr("camera")›）中，并随摄像头在不同时隙和会话之间移动。留空则使用从摄像头主机读取的名称。/ 显示在监视器顶部横幅中。留空则使用从摄像头主机读取的名称。连接摄像头即可为其指定名称。.
| Item | Type | Default |
|---|---|---|
| 显示名称 | Row | — |
展示
| Item | Type | Default |
|---|---|---|
| 保持屏幕在显示器上亮起 | Switch | On screen_keep_awake |
省电模式
| Item | Type | Default |
|---|---|---|
| 省电模式下暂停实时画面 | Switch | — battery_saver_pause_lv |
| ‹o.label› | Chip | — |
触觉
两类，分别设置。“轻触和切换”= 按钮、芯片、标签、菜单行和工具切换按钮上的触感反馈。“相机确认”= 相机接受或拒绝更改（程序、编解码器、轻触自动对焦、眼部开关、机身控制写入、连接）时发出的成功/警告嗡嗡声。“关闭”仅静音该类；“轻触”将 iOS 的振动模式替换为一次轻柔的轻触；“重触”则增加一次重重的轻触。所有设置均随预设一起保存。如果“测试”不起作用：iOS 设置 ▸ 声音和触感 ▸ 系统触感和辅助功能 ▸ 触摸 ▸ 振动必须开启。.
| Item | Type | Default |
|---|---|---|
| 触觉反馈 | Switch | — 已启用触觉反馈 |
回忆相机
Custom control (list, colour picker or reorderable group).
固件和应用程序
| Item | Type | Default |
|---|---|---|
| 相机固件 | Row | — |
| Z Assist 版本 | Row | — |
关于我们及帮助
Custom control (list, colour picker or reorderable group).
开发者
开发者模式会记录应用程序事件和摄像头通信，以便进行故障排除。正常使用时请关闭此功能——它会消耗电池电量和存储空间。开启此功能后，显示器右侧边栏会显示“日志”按钮，连接屏幕上也会显示“演示模式”。.
| Item | Type | Default |
|---|---|---|
| 相机属性 | Row | — |
SDR信号校准
Custom control (list, colour picker or reorderable group).
预设说明
Custom control (list, colour picker or reorderable group).