{"id":9011,"date":"2026-10-13T21:08:56","date_gmt":"2026-10-13T21:08:56","guid":{"rendered":"http:\/\/zassist-guide-9011"},"modified":"2026-10-19T10:42:21","modified_gmt":"2026-10-19T09:42:21","slug":"camera-instellinggereedschappen","status":"publish","type":"page","link":"https:\/\/www.zassist.dfgrom.com\/nl\/user-guide\/camera-setup-tools\/","title":{"rendered":"Camera-instellingentools"},"content":{"rendered":"
\uf55f<\/i>
<\/div><\/div><\/div>

Camera-instellingentools<\/h2>
\"CAMERA
CAMERA SETUP tab web preview \u2014 replace with device shot<\/span><\/figcaption><\/figure>
\uf283<\/i><\/div>
AF\/MF<\/div>
Autofocus \/ manual focus switch (AF-S, AF-C, MF).<\/div><\/div><\/div>
\uf557<\/i><\/div>
AF-gebiedall bodies (Z5, Z6, Z7 and Z50 use the body's standard AF-area setting)<\/span><\/div>
AF area mode \u2014 where the camera looks for focus (wide, single-point, tracking\u2026).<\/div><\/div><\/div>
\uf2e6<\/i><\/div>
OnderwerpZ8, Z9, Z6III, Zf, Z50II, Z5II, ZR<\/span><\/div>
Subject detection \u2014 people, animals or vehicles priority for AF.<\/div><\/div><\/div>
\uf48a<\/i><\/div>
MF-wijzerplaat<\/div>
Manual-focus dial. Drive the lens focus motor remotely with a precision ruler slider (yellow reference line). Long-press the MF button to choose horizontal or vertical orientation \u2014 photo and video each remember their own. PULL ON opens the floating focus-pull panel (drag it anywhere): with the slider at your first mark, tap A to store it, refocus and tap B for the second mark \u2014 the pills show each point's position. The \u25c0\/\u25b6 buttons then run a smooth, eased focus transition to A or B over the selected time; tap the timer chip to cycle the duration (0.5 s \u2192 5 s in half-second steps) and tap either button mid-run to stop. The elapsed time shows in the panel title while a pull runs.<\/div><\/div><\/div>
\uf55f<\/i><\/div>
PZ-wijzerplaatZ8, Z9, Z6III, Zf, Z50II, Z5II, Z30, Z50, Zfc, ZR \u2014 with a Nikon power-zoom lens attached<\/span><\/div>
Power Zoom dial (PZ). A spring-back rocker that drives a power-zoom lens: push toward W (wide) or T (tele) and release to stop \u2014 in Auto the drive speed follows how far you push. Long-press the PZ button to pin a fixed drive speed (\u22125\u2026+5, same scale as the body menu) or to switch the slider between horizontal and vertical. With a speed pinned you also get W\/T direction plus Start \/ Pause \/ Stop transport buttons for hands-off automatic zooms at constant speed. A \/ B pills store and recall exact zoom positions (PZ3 lenses): tap an empty pill to STORE the lens's current zoom position, tap it again to RECALL \u2014 the lens drives itself to that spot \u2014 and long-press to clear. The recall drive runs at the pinned speed when one is set; in Auto (no pinned speed) it uses the body-menu default (0). Positions are stored per lens, so a preset saved with one lens won't drive another. The live focal length shows next to the readout. Greyed out when the attached lens has no power zoom.<\/div><\/div><\/div>
\uf578<\/i><\/div>
VR\/IBIS<\/div>
In-body stabilisation (VR\/IBIS) on\/off and mode.<\/div><\/div><\/div>
\uf58f<\/i><\/div>
Meter<\/div>
Exposure metering pattern (matrix, center-weighted, spot, highlight).<\/div><\/div><\/div>
\uf27a<\/i><\/div>
Pic Ctrl<\/div>
Picture Control \u2014 the camera's colour\/tone preset (incl. flat\/N-Log looks). The picker lists the camera's own controls and your Custom slots with their body names; a control that was adjusted on the camera is marked with an asterisk (Standard*) and its changes are listed under it, on the button badge too. The footer opens the Picture Control editor.<\/div><\/div><\/div>
\uf28c<\/i><\/div>
ADL<\/div>
Active D-Lighting \u2014 in-camera highlight\/shadow protection.<\/div><\/div><\/div>
\uf58d<\/i><\/div>
Hoge ISO NR<\/div>
High-ISO noise reduction strength.<\/div><\/div><\/div>
\uf362<\/i><\/div>
Zachte huidZ8, Z9, Z6III, Zf, Z50II, Z5II, ZR<\/span><\/div>
Skin softening amount for interview\/beauty work.<\/div><\/div><\/div>
\uf1dc<\/i><\/div>
Niet-CPUall bodies except Z50<\/span><\/div>
Non-CPU lens data \u2014 register manual lenses so IBIS and EXIF work correctly. Tap a slot to make it the active lens. LONG-PRESS any slot to edit it or to fill a free one: lens name (up to 36 characters), focal length (0.1 mm steps below 100 mm) and maximum aperture (F0.01 steps below f\/10) are written straight into the camera's Non-CPU lens data \u2014 the lens you are shooting with stays selected, and the picker labels update as soon as the body confirms. CLEAR SLOT empties a slot again.<\/div><\/div><\/div>
\uf5b0<\/i><\/div>
Niveau<\/div>
Virtual horizon \/ level. Shows camera pitch and roll with smooth motion for perfectly level shots. Long-press for roll\/pitch numbers and angle-ladder labels.<\/div><\/div><\/div>
\uf4f7<\/i><\/div>
HF-flikkeringZ8, Z9, Z6III, Z50II, Z5II, ZR<\/span><\/div>
High-Frequency Flicker Reduction (Nikon HF flicker) on\/off \u2014 the body's own setting for the current mode (photo or video). Hidden by default: enable it in Settings \u2192 tools. While it is On and the exposure program allows it (M or S in photo, M in video, shutter 1\/30\u20131\/8000), the shutter chip and Body Control tile show Nikon's fine-tune format \u2014 only the denominator with one decimal, e.g. 512.0 instead of 1\/500 \u2014 and the Shutter sheet gains \u25c4 faster \/ \u25ba slower rows that step the fine-tune one dial click at a time. Available on Z-series bodies that support it; on other cameras the button reads not available.<\/div><\/div><\/div><\/section>